Search for Musle Car Parts:

CHEVY CHEVROLET BBC STROKER 496 454 509 REBUILT ENGINE 2 BOLT BOAT CORVETTE 427 For Sale
CHEVY CHEVROLET BBC STROKER 496 454 509 REBUILT ENGINE 2 BOLT BOAT CORVETTE 427

CHEVY CHEVROLET BBC STROKER 496 454 509 REBUILT ENGINE 2 BOLT BOAT CORVETTE 427:
$2,399

This item has been shown 42256 times.


THIS AUCTION IS FOR A COMPLETLEY REBUILT 2 BOLT MAIN496 CUBIC INCH!!!!! (MARK IV, 454 2 BOLT BLOCK 2 PIECE REAR SEAL, 9.800 DECK) CHEVROLETSTROKER SHORT BLOCK.OUR BLOCKS ARE MACHINED ON OUR BRAND NEW RMC V40 FULLY AUTOMATIC CNC MACHINE FOR THE TIGHEST ANDBEST FINISH PRODUCT HERE ON E BAYOR ANYWHERE!!!THE WORK PREFORMED TO THIS ENGINE IS AS FOLLOWS:

1. THIS BLOCK HAS BEEN OVEN CLEANED(HAS NO RUST OR SCALE), SHOT PEENED, MAGNAFLUXEDAND PRESSURE TESTED.

2. THE BLOCK IS FRESHLY BORED AND TORQUE PLATE MOLYHONED TO .060 ALL BLOCKS ARE ALSO SONIC CHECKED TOENSHURE CONCENTRIC CYLINDER WALL THICKNESS AFTER BORING AND HONING.

3.THE BLOCK HASBEENLINE HONED, SQUARE DECKED, AND NEW CAM BEARINGS INSTALLED ALONG WITHNEW BRASS FREEZE PLUGS. ALL BOLT HOLES AND THREADS ARE FINE.

4. THIS SHORT BLOCK HAS A BRAND NEW SET OF LIGHTWEIGHT, FULLY CNC MACHINEDWISECO FORGEDRACING PISTONS AND SPEED PRO PLASMA MOLY RINGS, WHICH WILL YEILD 11.50:1 COMPRESSION WITH A CLOSED CHAMBER HEAD AND 10.00:1 WITH AN OPEN CHAMBER HEAD, PERFECT FOR PUMP GAS. KEITH BLACK IS AN INDUSTRY LEADER IN RACING PISTONS.

5. BRAND NEWKING H CUTMAIN AND ROD BEARINGS WERE INSTALLED, (NO CHEAPO WHITE BOX NO NAME REBUILDER COMPONENTS HERE)

6. RODS ARE BRAND NEW PRO COMP ENTERPRISES FORGED STEEL H BEAM CAP SCREW WITH 7/16 BOLTS AND FULL FLOATING WRIST PINS. THE RODS ARE 6.385 (STOCK ROD LENGTH IS 6.135) THESE RODS ARE .250 LONGER THEN STOCK. THE INCREASE IN ROD LENGTH PRODUCES LESS SIDE LOAD ON THE PISTONWHICH RESULTS IN LESS FRICTIONAND GREATER HORSEPOWER AND TORQUE THROUGHOUT THE RPM RANGE.

7. THE CRANKSHAFTIS BRAND NEW PRO COMP CAST STEEL CRANKSHAFT.THE CRANKSHAFT IS SHOT PEENED FOR STRESS RELIEVING AND HAS A NICE .125 RADIUS ON THE MAINS AND ROD JOURNALS!, THIS CRANKSHAFT IS ALSO INTERNALLY BALANCED AND IS THE BEST OF THE BEST!!(4.250 STROKE,1/4 INCHLONGER THEN STOCK 454), FRESHLY MICROPOLISHED AND STANDARD ON THE ROD AND MAIN JOURNELS.

8. THIS ENGINE IS FULLY BALANCED ON OUR NEW RMC COMPUTER BALANCER AND IT IS ALSO BLUEPRINTED. PISTONS, RODS AND CRANKSHAFT ARE BALANCED TO LESS THEN 1 GRAM. ( MOST MACHINE SHOPS ONLY BALANCE TO A 5 GRAM SPREAD) PISTONS HAVE BEEN CLEARENCED TO ACCEPT UP TO A .760 LIFT ON BOTH THE INTAKE AND EXHAUST SIDE. BEARING CLEARENCES WERE SET AT .003 ON BOTH THE MAINS AND RODS.THIS ENGINE WILL PRODUCE 515HP AND GOOD TO 7000RPM

THIS SHORT BLOCK HAS NO CAM. WE ARE A FULL SERVICE MACHINE SHOP WITH OVER 55 YEARS IN BUSINESS. INSIST ON ONLYTHE FINESTQUALITY FOR YOUR STREET OR RACE CAR BID EARLY IF YOU WANT IT. FREE .SHIPPING ANYWHERE IN THE USA 48 STATES. I WILL ANSWER ALL QUESTIONS. THANKS FOR LOOKING.


SquareTrade © AP6.0



Buy Now

Other related muscle car parts: